INDUSTRIAL ISOLATED RS232 TO RS485 RS422 CONVERTER / RS232 ISOLATOR

Isolated RS232 to RS485 Converter

Isolated RS232 to RS422 Converter

Isolated RS232 to RS485 / RS422 Converter

RS232 Isolator (3-wire)

RS232 Isolator (7-wire)

RS232 to RS485 Converters

RS232 to RS422 Converters

RS232 RS485 RS422 to TTL Converters

RS232 RS485 RS422 Repeaters

Fiber Optic Converters

USB Serial Adapters

RS232 Serial Analyzer

CommFront offers a range of high-quality, industrial-grade, port or externally-powered RS232 isolators and opto-isolated USB RS232 / RS485 / RS422 converters / repeaters / hubs / splitters. These plug-and-play products operate within a wide temperature range (-40ºF to 185ºF / -40ºC to 85ºC), feature 600W surge protection and 15kV static protection, and come with built-in 120 Ohm terminators for easy installation. Whether your environment is commercial or industrial, "clean" or "noisy"*, our isolator and converter products provide safe, easy, and cost-effective solutions for your data-conversion applications.

* A "noisy" environment is an area surrounded by ground loops, transient surges and spikes, which could potentially harm your expensive equipment such as computers and data communication devices. The CommFront opto-isolated converters and isolators provide simple and effective ways to protect your devices from such potential harms.

OPTO-ISOLATED CONVERTER SELECTION TABLE

OPTO-ISOLATED RS232 TO RS485 CONVERTER

$84.95 $74.95
Order Here

This product features opto-isolation circuitry, which effectively protect your RS-232 devices from ground loops, transient surges and spikes. The unit is powered from the RS-232 data line (self-powered); it also supports data direction auto-turnaround. Therefore, no external power or flow control is required.

Product Comparison | Declaration of Conformity

OPTO-ISOLATED RS232 TO RS422 CONVERTER

$84.95 $74.95
Order Here

The CVT-422-3 is an industrial grade (wide temperature range with surge & static protection) optically isolated bi-directional RS232 to RS422 converter, which can be used to convert any standard RS-232C port into a four-wire full-duplex RS-422 port and vice versa.

This product features opto-isolation circuitry, which effectively protect your RS-232 devices from ground loops, transient surges and spikes. The unit is powered from the RS-232 data line (self-powered); it also supports data direction auto-turnaround. Therefore, no external power or flow control is required.

Product Comparison | Declaration of Conformity

OPTO-ISOLATED RS232 TO RS485 RS422 CONVERTER

$89.95 $79.95
Order Here

This product features opto-isolation circuitry, which effectively protect your RS-232 devices from ground loops, transient surges and spikes. The unit is powered from the RS-232 data line (self-powered); it also supports data direction auto-turnaround. Therefore, no external power or flow control is required.

Product Comparison | Declaration of Conformity

$149.95 $119.95
Order Here

The unit is powered from an external 9 to 30VDC power supply, so you do not have to worry about the power capability of your RS232 device.

Product Comparison | Declaration of Conformity

$149.95 $119.95
Order Here

This product features opto-isolation circuitry, which effectively protects your RS-485/RS-422 devices from transient surges, ground loop and spikes. The unit supports serial data rates up to 115,200bps and features data format auto-sensing and self-adjusting, and, therefore, no DIP switch or jumpers are required. When working with RS-485 signals, the CommFront’s auto-turnaround feature eliminates the need for flow control.

Product Comparison | Declaration of Conformity

$159.95 $149.95
Order Here

The HUB-485-4 is an industrial-grade (wide temperature range with surge & static protection) optically-isolated RS-485 Hub/Splitter/Repeater, which can be used to expand RS-485 networks by splitting one RS-485 network into four, in turn increasing the maximum number of nodes and the distance covered by an RS-485 network.

The product features opto-isolation circuitry, which effectively protects your RS-232/RS-485 devices from transient surges, ground loops and spikes. Opto-isolation also eliminates ground loop and noise problems. The unit supports data rates up to 115,200 bps and features data format auto-sensing and self-adjusting; therefore, no DIP switch or jumpers are required.

Product Comparison | Declaration of Conformity
 

(Windows 7 supported!)
$129.95 $119.95
Order Here

The USB-Serial-3 is an industrial-grade (wide temperature range with surge & static protection) optically-isolated USB to RS-232/485/422 converter, which can be used to convert any standard USB port into a three-wire RS-232 port, a two-wire RS485 port, or a four-wire RS422/RS485 port and vice versa.

This product features opto-isolation circuitry, which effectively protects your USB devices from transient surges, ground loops and spikes.

The unit uses the latest chipset from Silicon Labs and is fully compatible with Windows 7/Vista/XP/Server2003/2000 (32-bit), Windows 7/Vista (64-bit), Win CE (5.0, 6.0), Mac OSX, and Linux (2.6x, 2.4.36).

Product Comparison | Declaration of Conformity