|
INTRODUCTION (INDUSTRIAL RS422 RS485 TO TTL
CONVERTER)
|
|
|
 |
|
The TTL-485_422-2 is an
industrial-grade
(wide temperature range with surge & static protection) bi-directional
RS485 to TTL converter / RS422 to TTL converter,
which can be used to convert RS485 or RS422 to 5VDC
TTL-compatible levels and vice versa. It is also ideal for
extending the full duplex TTL distance.
This industrial-grade RS485 /
RS422 to TTL 5V converter operates within a
wide temperature range (-40ºF
to 185ºF / -40ºC to 85ºC),
and features 600W surge protection and 15kV static
protection.
The unit is powered
from an external 5VDC power supply. It supports data
direction auto-turnaround, and therefore, no flow control is
required.
Product Comparison |
Declaration of Conformity
data sheet | 
FAQs
|
product selection guide |
|
 |
|
$64.95
$59.95
In stock
Order Here
|
|
|
|
|
|
|
|
|
|
PRODUCT PHOTOS
(INDUSTRIAL RS422 RS485 TO TTL CONVERTER) |
|
|
|
 |
| |
|
FEATURES (INDUSTRIAL RS422 RS485 TO TTL
CONVERTER)
|
|
|
-
Converts RS485 or RS422 to TTL 5V and vice versa.
-
Industrial grade with wide temperature range
(-40ºF
to 185ºF / -40ºC to 85ºC),
surge (600W)
and static protection (15kV).
- External 5V powered.
- Plug and play (Hot-pluggable, Data format Auto-sensing &
Self-adjusting).
- Built-in
surge protection, static protection and circuit
protection.
- Surface Mount Technology manufactured to ISO-9001 standards.
-
CE certified: strictly certified by world-class lab TUV.
-
5-year
manufacturer's warranty. |
| |
|
SPECIFICATIONS (INDUSTRIAL RS422 RS485 TO
TTL CONVERTER)
|
|
|
|
Part Number:
|
TTL-485_422-2 |
|
Compatibility: |
EIA/TIA
RS-485 standard and TTL level |
|
Power Source: |
+5VDC (±5%)
Regulated Power Supply (not included) |
|
Current
Consumption: |
Less than
30mA |
|
Baud
Rates: |
300
to 115,200bps (Auto-sensing & Self-adjusting) |
|
Distance: |
RS485 side: Up
to 4000ft (1.2km) at 19,200bps;
TTL side: 10ft (3m) |
|
Connector: |
TTL side: DB-9
Male; RS-485/422 side: DB-9 Male; Termination Board (TTL): DB-9
Female and a 3-way Terminal Block; Termination
Board (RS-485/422): DB-9 Female and a 6-Way Terminal Block |
|
Maximum number
of drops: |
64 |
|
End of Line
Terminator: |
120Ω
(Built-in) |
|
Surge protection: |
600W |
|
Static
protection (ESD): |
Up to 15KV |
|
Dimensions (H
x W x D): |
0.63 x 1.3
x 4.6 in (16 x 32 x 118 mm) (with termination boards) |
|
Weight: |
1.8 oz (51
g) (with termination boards) |
|
Operating
Temperature: |
-40ºF
to 185ºF (-40ºC to 85ºC) |
|
Operating
Humidity: |
Up to 90%
RH (no condensation) |
|
| |
|
|
TTL SIGNAL LEVELS
|
|
|
|
TTL Input |
TTL Output |
|
High
(>2.0V) |
High
(>3.5V) |
|
Low (<0.8V) |
Low (<0.6V) |
|
| |
|
|
CONVERTER CONNECTOR / TERMINAL
BLOCK PINOUTS
|
|
|
|
|
TTL
Side |
|
Pin |
1 |
3 |
5 |
|
Signal |
TX |
RX |
GND |
|
Function |
TTL Out |
TTL In |
GND |
|
|
|
 Note:
The TTL side comes with a 3-way terminal block for
easy wire connections. However, you may choose not
to use the terminal block provided, and simply
follow the above table for pin assignments. |
|
|
DB-9
Female (view from front) / Terminal Block |
|
|
|
RS485/RS422 Side |
|
Pin |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
4 |
|
Jumper |
J2
(default: ON) |
J3
(default: ON) |
|
J1
(default: ON) |
J4
(default: ON) |
|
RS485 |
A+ (J2 ON) |
B- (J3 ON) |
GND |
(J1 ON) |
Terminate/remove Jumper J4
to turn ON/OFF the 120Ω
end-of-line terminator. |
|
RS422 |
(J2 OFF) |
(J3 OFF) |
GND |
(J1 OFF) |
|
TX+ |
RX+ |
TX- |
RX- |
GND |
|
|
|
|
|
 Note:
The RS485/RS422 side comes with a 6-way terminal
block for easy wire connections. However, you may
choose not to use the terminal block provided and
simply follow the above table for pin assignments. |
|
|
|
DB-9 Male (view from front) /
Terminal Block |
| |
|
|
CONNECTIONS (RS422 RS485 TO TTL
CONVERTER)
|
|
 |
|
Figure 1: Master-Slave
Multi-Drop Connections (RS-485) |
| |
|
| |
 |
| |
Figure 2: Master-Slave
Multi-Drop Connections (RS-422) |
| |
|
| |
 |
| |
Figure 3: Extending
TTL Distance (Full-Duplex) |
|
|
|
TROUBLESHOOTING INSTRUCTIONS
FOR RS485
RS422 TO TTL CONVERTER
|
|
|
|
1) External 5VDC power input |
|
 |
|
|
|
-
CAUTION: Be sure that the
DC power applied to pin +5V and GND is within the range
of +4.75V to +5.25V (5V ±5%). Excessive input voltage or
incorrect polarity connection could damage the
converter.
|
|
2) Loopback Test |
|
 |
|
- Connect your PC's
RS485 or RS422 port to the RS485/422 side and short TX
and RX on the TTL side (as shown above).
- Run
232Analyzer FREE
version software on your computer.
- Select "ASCII" for
both the Send and Receive data formats. Then send
command and/or string such as "CommFront" from the
232Analyzer software. You should receive an echo of the
command/string sent ("CommFront"). By performing a
simple loopback test like this, you can test both the
transmitter and receiver of the converter. This is very
helpful when you are in doubt about the performance of
your converter.
|
|
Screenshot: Send/receive
commands from 232Analyzer software. |
|
|
|
232Analyzer is an advanced RS232 Serial Protocol Analyzer
software
that allows you to control, monitor and analyze serial port
(RS232 / RS485 / RS422 / TTL, etc.) activities.
Not just the data,
it also allows you to monitor or change RS-232's line
states: RTS, CTS, DTR, DSR, DCD, and RI.
The FREE version (no time
limitation) can be downloaded from
here.
TECH NOTES
RS-232: 3 easy steps to understand and control
your RS232 devices |
|
|
